Sku:#LQ-ES-02

Split Pressurized Solar Water Heater - 02

Description:

Separate pressurized solar water heaters contain three main parts: Solar Collector, Working Station and Water Tank. Solar collector should be installed on the roof or wall. The tank contains double copper coils, and it can be put anywhere you want, thus the whole system is harmonious with the building.

  • Addition Description

Separate pressurized solar water heaters contain three main parts: Solar Collector, Working Station and Water Tank. Solar collector should be installed on the roof or wall. The tank contains double copper coils, and it can be put anywhere you want, thus the whole system is harmonious with the building.
Heat is transferred from solar collector to the tank by controller. Not only solar energy but also other energy can be used for water heating in this system. High efficiency and cost saving. And if the sunshine is not strong enough, the user can use electric heating element for back up. Even if in cloudy or rainy day, the user can enjoy hot water. It is ensured that when using heat pipes no water goes into the tube and there is neither incrustation nor bursting. Moreover, water can go upward at anytime.
Working Principle:
When the temperature difference between solar collector and tank reaches the set value, the controller will start the circulation pump automatically. The circulation pump makes heat-conducting liquid circulate. The heat-conducting liquid transfers heat to water by lower heat exchanger in the water tank.
When the temperature difference between solar collector and tank doesn't reach the set value, the circulation pump will be shut automatically. In case the temperature of the water tank does not reach Tmax, Electric Heating Element will start to work automatically. The higher copper coil can connect with other energy.

Specifications:
Inner tank: thickness of Titanium Steel: 2mm; thickness of Enamel Coating: 0.5mm.
Outer tank: thickness of Colored Steel Sheet: 0.5 mm
Tank Include: 1.5kw or 2.5kw Electric Heating Element, T&P Valve, Mg Anode, sensor, and Double Copper coil
Tank Capacity: 100 - 500 L
Working Pressure: 0.6 mpa
Vacuum tube: Heat Pipe
Vacuum tube model: 58mm× 1800mm
Frame: thickness of Adopt galvanized steel: 1.5mm
Accessories: Solar Work Station

Split Solar Water Heater With Enamel Tank

Vol.(L)

100L

120L

150L

200L

250L

300L

400L

500L

Inner Tank

Φ368

Φ368

Φ368

Φ426

Φ480

Φ550

Φ610

Φ610

Outer Tank

Φ450

Φ450

Φ450

Φ520

Φ570

Φ65s0

Φ700

Φ700

Insulation Layer

Polyurethane

Polyurethane

Polyurethane

Polyurethane

Polyurethane

Polyurethane

Polyurethane

Polyurethane

Material Coating

Enamel

Enamel

Enamel

Enamel

Enamel

Enamel

Enamel

Enamel

Enamel Thickness (mm)

0.5

0.5

0.5

0.5

0.5

0.5

0.5

0.5

Surface area heat
exchanger top (m2)

0.4

0.4

0.4

0.4

0.5

0.5

Surface area heat
exchanger bottom(m2)

0.5

0.5

0.6

0.7

0.7

0.7

0.8

0.8

Packing case size (mm)

490*490*1165

490*490*1355

490*490*1635

555*555*1640

605*605*1630

685*685*1520

735*735*1640

735*735*1980

20'GP (set)

52

43

37

28

24

20

18

16

40'GP(set)

108

91

78

61

52

42

36

32

40'HQ(set)

136

113

97

75

64

52

45

40

  • Brand:
    Longquan Solar & OEM
  • Color:
    Produced according to customer requirements
  • Place of Origin:
    China
  • Price Terms:
    FOB, CIF
  • Payment Terms:
    T/T, L/C
  • Supply Ability:
    500 sets/day
  • Delivery Time:
    7 days/according to the order
  • Minimum Order:
    1 set
  • Send Inquiry

Separate pressurized solar water heaters contain three main parts: Solar Collector, Working Station and Water Tank. Solar collector should be installed on the roof or wall. The tank contains double copper coils, and it can be put anywhere you want, thus the whole system is harmonious with the building.

*Subject:
*Content:
Your Company:
Your Name:
*Your E-Mail:
Telephone Number:
Fax Number:
Your Homepage: